diff --git a/fan_control_box.py b/fan_control_box.py
index 1cedfd1..ce0d925 100644
--- a/fan_control_box.py
+++ b/fan_control_box.py
@@ -230,26 +230,35 @@ lower_box = make_component_holder(
 lower_box = make_component_holder_line(
     lower_box,
     pole_height=5,
-    line_x_dist=breadboard_height,
+    line_x_dist=breadboard_height + 3.8,
     line_y_dist=0,
-    x_offset=-(breadboard_height / 2.0),
+    x_offset=-(breadboard_height / 2.0) - 1.9,
     y_offset=40,
 )
 
 bc_pole_radius = 4
-lower_box =  lower_box.workplane(offset=(wall_thickness / 2.0)).move(-(lbc_height/2.0), -25).box(5, lbc_width-5, 13)
-lower_box =  lower_box.workplane(offset=(wall_thickness / 2.0)).move(lbc_height/2.0 - bc_pole_radius*2, -25).box(5, lbc_width-5, 13)
+lower_box = (
+    lower_box.workplane(offset=(wall_thickness / 2.0))
+    .move(0, -50)
+    .box(lbc_width - 5, 5, 13)
+)
+lower_box = (
+    lower_box.workplane(offset=(wall_thickness / 2.0))
+    .move(0, bc_pole_radius)
+    .box(lbc_width - 5, 5, 13)
+)
+
 lower_box = make_component_holder_line(
     lower_box,
     pole_height=6,
     pole_radius=bc_pole_radius,
-    line_x_dist=lbc_height - lbc_hole_diameter - lbc_hole_radius,
-    line_y_dist=0,
-    x_offset=-(lbc_height / 2.0),
-    y_offset=-(lbc_width / 2.5),
+    line_x_dist=0,
+    line_y_dist=lbc_height - lbc_hole_diameter - lbc_hole_radius,
+    x_offset=0,
+    y_offset=-(lbc_width - lbc_hole_diameter - lbc_hole_radius + 1.1),
 )
 
-#lower_box =  lower_box.workplane(offset=(wall_thickness / 2.0)).box(lbc_height, 5, 13)
+# lower_box =  lower_box.workplane(offset=(wall_thickness / 2.0)).box(lbc_height, 5, 13)
 
 cq.exporters.export(lower_box, "/home/deck/model_files/fan_control_box_lower.stl")