formatting

amp_case.py

@@ -28,7 +28,7 @@ panel_distance = 10.5 + (
     panel_component_diameter / 2
 )  # distance between each panel component
 panel_dist_from_side = 2
-panel_dist_from_bottom = 0 # how far the panel components are from the bottom
+panel_dist_from_bottom = 0  # how far the panel components are from the bottom
 
 result = Workplane().box(amp_length, amp_width, middle_width)
 
@@ -45,7 +45,7 @@ result = (
     .center(0, amp_width / 2)
     .box(amp_length, amp_width + bottom_width, bottom_width)
     .workplane(offset=-10)
-    .move(-(amp_width/2), 0)
+    .move(-(amp_width / 2), 0)
     .box(10, 10, 10, combine="cut")
 )
 
@@ -53,7 +53,8 @@ result = (
     result.workplane(offset=-7.8)
     .center((amp_width / 2) - (panel_width / 2) - 1, 0)
     .box(panel_width, amp_width, amp_height)
-    .faces("+Z").chamfer(0.9, 1)
+    .faces("+Z")
+    .chamfer(0.9, 1)
 )
 
 panel_holes = (
@@ -77,11 +78,17 @@ panel_holes_2 = (
 result = result.cut(panel_holes)
 result = result.cut(panel_holes_2)
 
+result = (
+    result.workplane()
+    .line(0, amp_width, forConstruction=True)
+    .vertices()
+    .cylinder(3, 5)
+)
+
 back = (
-    result
-    .workplane(offset=-6.3)
+    result.workplane(offset=-6.3)
     .center(-(amp_width) + 2, 0)
-    .box(panel_width*2.5, amp_width + side_width, amp_height + 2.5)
+    .box(panel_width * 2.5, amp_width + side_width, amp_height + 2.5)
 )
 
 back_screws = (
@@ -94,7 +101,7 @@ back_screws = (
 )
 
 back = back.cut(back_screws)
-back = back.center(31.5, 0).box(amp_width, amp_width+9, amp_width, combine="cut")
+back = back.center(31.5, 0).box(amp_width, amp_width + 9, amp_width, combine="cut")
 
 result = result.cut(back_screws)
 
@@ -102,6 +109,7 @@ cq.exporters.export(result, "/home/deck/model_files/amp_case.step")
 cq.exporters.export(back, "/home/deck/model_files/amp_case_back.step")
 
 try:
-    show_object(back)
+    # show_object(back)
+    show_object(result)
 except NameError:
     pass

watch_stand.py

@@ -25,7 +25,7 @@ band_width = 21
 band_diameter = 55
 band_radius = band_diameter / 2
 
-first_circle_height = 175 # how tall the horizontal circle part will be
+first_circle_height = 175  # how tall the horizontal circle part will be
 
 Workplane = cqmore.extend(Workplane)
 Workplane.addSvgPath = addSvgPath
@@ -54,14 +54,14 @@ stand_base = (
     .threadedHole(screw, 34, simple=simple, fit="Loose")
 )
 
-stand_base = stand_base.faces(">X[0]").sphere(base_radius*1.5)
-stand_base = stand_base.workplane(offset=base_radius*2).box(
+stand_base = stand_base.faces(">X[0]").sphere(base_radius * 1.5)
+stand_base = stand_base.workplane(offset=base_radius * 2).box(
     base_diameter * 2, base_radius * 3, base_radius * 3, combine="cut"
 )
 
 stand_base = (
     stand_base.workplane(offset=base_radius - 5)
-    .rect(base_radius*1.5, base_radius*1.5, forConstruction=True)
+    .rect(base_radius * 1.5, base_radius * 1.5, forConstruction=True)
     .vertices()
     .cylinder(9, 6, combine="cut")
 )
@@ -115,6 +115,6 @@ cq.exporters.export(holder_part, "/home/deck/model_files/watch_stand_holder.step
 try:
     show_object(stand_base)
     # show_object(cut_polygon)
-    #show_object(holder_part)
+    # show_object(holder_part)
 except NameError:
     pass