from cadquery import exporters
from cq_warehouse.extensions import Workplane
from cq_warehouse.fastener import *
from cq_warehouse.thread import *
from cqmore.curve import archimedeanSpiral, circle
from cqmore.polygon import regularPolygon, star
from cqmore.polyhedron import polarZonohedra, Polyhedron, superellipsoid
from svg_path import addSvgPath
from svgpathtools import svg2paths
import cadquery as cq
import cqmore
from math import ceil, floor

Workplane = cqmore.extend(Workplane)
Workplane.addSvgPath = addSvgPath

shelf_width = 4.0
driver_diameter = 19
driver_radius = driver_diameter / 2
holder_width = 35
holder_thickness = 5
holder_length = holder_width * 6

shelf_hold_height = 20

result = Workplane()
result = result.box(holder_length, holder_width, holder_thickness).center(
    -holder_length / 2, 0
)

offset = 26

for i in range(1, 8):
    result = result.center(offset, 0)
    result = result.cylinder(holder_thickness + 1, driver_radius, combine="cut")

result = (
    result.workplane(offset=(shelf_hold_height / 2) - (holder_thickness / 2))
    .center(-(holder_length / 2) + holder_width / 1.25, holder_width / 2 + 6)
    .box(holder_length, shelf_width * 3, shelf_hold_height)
)

result = result.workplane(offset=(shelf_hold_height / 2) - (holder_thickness / 2)).box(
    holder_length, shelf_width, shelf_hold_height, combine="cut"
)

result = result.center(-holder_length / 2 - offset, 0)

for i in range(1, 10):
    result = result.center(offset, 0)
    result = result.box(18, shelf_width * 4, holder_width, combine="cut")

cq.exporters.export(result, "/home/deck/model_files/hexdriver_holder.step")

try:
    show_object(result)
except NameError:
    pass