from cadquery import exporters
from cq_warehouse.extensions import Workplane
from cq_warehouse.fastener import *
from cq_warehouse.thread import *
from cqmore.curve import archimedeanSpiral, circle
from cqmore.polygon import regularPolygon, star
from cqmore.polyhedron import polarZonohedra, Polyhedron, superellipsoid
from svg_path import addSvgPath
from svgpathtools import svg2paths
import cadquery as cq
import cqmore
from cq_gears import (
    SpurGear,
    Worm,
    HerringboneGear,
    RackGear,
    HerringboneRackGear,
    BevelGear,
    BevelGearPair,
)

Workplane = cqmore.extend(Workplane)
Workplane.addSvgPath = addSvgPath

adapter_diameter = 30.3
adapter_radius = adapter_diameter / 2.0

adapter_height = 50
adapter_thickness = 3  # how thick the side is

end_part_height = 150  # how long the end part is
end_part_width = 10

side_cut = Workplane("ZX")
side_cut = (
    side_cut.workplane(offset=-end_part_width)
    .move(-(adapter_height + end_part_height - 50), 43)
    .makePolygon(
        regularPolygon(
            nSides=3,
            radius=60,
            thetaStart=30,
            thetaEnd=360 - 30,
        )
    )
    .extrude(50)
)

result = Workplane()
result = result.cylinder(adapter_height, adapter_radius + adapter_thickness)
result = result.workplane(offset=5).cylinder(
    adapter_height, adapter_radius, combine="cut"
)

result = result.workplane(offset=-adapter_height * 1.9).box(
    end_part_width, end_part_width, end_part_height
)
result = result.workplane(offset=0).box(8, 8, 400, combine="cut")
result = result.cut(side_cut)

cq.exporters.export(result, "/home/deck/model_files/vacuum_adapter.stl")
try:
    show_object(result)
except NameError:
    pass