from cadquery import exporters
from cq_warehouse.extensions import Workplane
from cq_warehouse.fastener import *
from cq_warehouse.thread import *
from cqmore.curve import archimedeanSpiral, circle
from cqmore.polygon import regularPolygon, star
from cqmore.polyhedron import polarZonohedra, Polyhedron, superellipsoid
from svg_path import addSvgPath
from svgpathtools import svg2paths
import cadquery as cq
import cqmore
from math import ceil, floor

Workplane = cqmore.extend(Workplane)
Workplane.addSvgPath = addSvgPath

width = 154
height = 182

holes_plane = (
    Workplane("XZ")
    .workplane(offset=-2)
    .center(85, height - 75)
    .cylinder(8, 14 / 2)
    .center(-20, 0)
    .cylinder(8, 14 / 2)
    .center(10, 20)
    .cylinder(8, 17 / 2)
)


magnet_holes_plane = (
    Workplane("XZ")
    .workplane(offset=-2)
    .center(20, height - 100)
    .cylinder(12, 2)
    .center(0, -90)
    .cylinder(12, 2)
)

cover_usb = Workplane("XZ").workplane(offset=-4.5).center(-4, height - 77).box(11, 5.3, 1.0)

result = cq.importers.importStep("/home/deck/Downloads/Backpanel_Part3.stp")


result = result.cut(holes_plane)
#result = result.union(magnet_holes_plane)
result = result.union(cover_usb)

# magnet distance should be 90 mm apart
test_piece = Workplane().workplane(offset=110).center(70, 0).box(80, 4, 60).cut(holes_plane)

cq.exporters.export(result, "/home/deck/model_files/modified_backpanel_part_3.step")
cq.exporters.export(test_piece, "/home/deck/model_files/modified_backpanel_test_piece.step")

try:
    show_object(result)
except NameError:
    pass